Skip to content

Greeting for Fedora Setup

Field Value
Source Obsidian · Claudian plugin
Session ses_fd11d9b61ffe2dDoY8eUmjLvdR
Started 2026-08-23 13:49
Messages 68
Parts 263 (text+patch+tool) · 57 reasoning · 48 tool calls
Model opencode:mimo-v2.5-free
Directory /home/sambasene/obsidian/Vault

hi

<linked_note path=“Fedora Setup.md” />

read — {"filePath": "/home/sambasene/obsidian/Vault/Fedora Setup.md"}

<path>/home/sambasene/obsidian/Vault/Fedora Setup.md</path>
<type>file</type>
<content>
1: # Fedora Setup Instructions
2:
3: Step-by-step guide to duplicate this environment on Fedora Workstation.
4:
5: ## Before running anything
6:
7: 1. Move the `obsidian/` folder into your home directory:
8: ```
9: /home/<your-username>/obsidian/
10: ```
11: It should contain: `.agents/`, `.openclaw/`, `.config/`, `Vault/`, `setup-fedora.sh`
12:
13: 2. Open a terminal.
14:
15: ## Run the setup script
16:
17: ```bash
18: chmod +x ~/obsidian/setup-fedora.sh
19: ~/obsidian/setup-fedora.sh
20: ```
21:
22: Say Y or N at each prompt. Defaults are sensible — just hit Enter to accept.
23:
24: ## After the
…[truncated]

Hey! 👋 I see you’ve got [[Fedora Setup.md]] open — your guide for duplicating this environment on Fedora Workstation.

What can I help you with? Need to:

  • Run through the setup steps on a new machine?
  • Troubleshoot something that’s not working?
  • Update the instructions?
  • Something else entirely?

Just let me know what’s on your mind!

before that, there is one mistake here, the obsidian folder is where i put the things that were needed. inside it there is a folder named Vault that is the actual vault in which by the way this setup fedora script sh and fedora setup md file are

Ah, got it! So the actual structure is:

~/obsidian/
├── .agents/
├── .openclaw/
├── .config/
└── Vault/ ← This is the vault
├── Fedora Setup.md
├── setup-fedora.sh ← Script is HERE, not in obsidian root
└── ... (other vault files)

Let me fix the note — the script path references are wrong:

edit — {"filePath": "/home/sambasene/obsidian/Vault/Fedora Setup.md", "oldString": " It should contain: .agents/, .openclaw/, .config/, Vault/, setup-fedora.sh", "newString": " It should contain:

…[truncated]`

Edit applied successfully.

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/Fedora Setup.md”, “oldString”: “bash\nchmod +x ~/obsidian/setup-fedora.sh\n~/obsidian/setup-fedora.sh\n”, “newString”: “```bash\nchmod +x ~/obsidian/

…[truncated]`

Edit applied successfully.

edit — {"filePath": "/home/sambasene/obsidian/Vault/Fedora Setup.md", "newString": "chmod +x ~/obsidian/Vault/setup-fedora.sh", "oldString": "chmod +x ~/obsidian/setup-fedora.sh"}

Edit applied successfully.

Done! Fixed three things in [[Fedora Setup.md]]:

  1. Structure description — clarified that setup-fedora.sh lives inside Vault/, not in the obsidian/ root
  2. Run instructions — updated path from ~/obsidian/setup-fedora.sh → ~/obsidian/Vault/setup-fedora.sh
  3. Troubleshooting — same path fix for the permission fix example

Good catch! Anything else you want to adjust before we move on?

no

Alright, all fixed then! 👍

What would you like to tackle next?

in the script the removable drive shouldn’t be taken into account since the folders needed where all moved into the home directory

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh"}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
1: #!/usr/bin/env bash
2: # ============================================================================
3: # setup-fedora.sh — Interactive setup for Fedora Workstation (GNOME)
4: # Duplicates the full dev environment from the Windows machine.
5: #
6: # Prerequisites: This script must be run from the "obsidian" folder on the
7: # removable drive, which contains:
8: # obsidian/
9: # ├── .agents/ (agent skills)
10: # ├── .openclaw/ (OpenClaw config + credentials)
11: # ├── .config/ (opencode config)
12: # └── Vault/ (the Obsidian vault)
13: #
14: # Usage: chmod +x setup-fedora.sh && ./setup-fedora.sh
15: #
…[truncated]

Got it! The script currently hunts for a removable drive, but since everything’s already in ~/obsidian/, we should just use the script’s own location as the source. Let me refactor it:

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “oldString”: “# ============================================================================\n# setup-fedora.sh — Interactive setup for F

…[truncated]`

Edit applied successfully.

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “newString”: “# ── Detect source directory ────────────────────────────────────────────────\n# The script lives in ~/obsidian/Vault/, so

…[truncated]`

Edit applied successfully.

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “newString”: “# ── Verify source directory ────────────────────────────────────────────────\ninfo "Source directory: $SOURCE_DIR"\n\n#

…[truncated]`

Edit applied successfully.

edit — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "oldString": "REMOVABLE_OBSIDIAN", "newString": "SOURCE_DIR", "replaceAll": true}

Edit applied successfully.

edit — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "oldString": " # Copy config from removable drive", "newString": " # Copy config from source directory"}

Edit applied successfully.

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “newString”: “ info "Copying OpenClaw config from source directory…"“, “oldString”: “ info "Copying OpenClaw config from removable d

…[truncated]`

Edit applied successfully.

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “newString”: “if ask "Copy Agent Skills from source directory?" Y; then”, “oldString”: “if ask "Copy Agent Skills from removable drive

…[truncated]`

Edit applied successfully.

edit — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “newString”: “if ask "Copy OpenCode/Claudian config from source directory?" Y; then”, “oldString”: “if ask "Copy OpenCode/Claudian con

…[truncated]`

Edit applied successfully.

edit — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "newString": " info \"Copying .config from source directory...\"", "oldString": " info \"Copying .config from removable drive...\""}

Edit applied successfully.

grep — {"pattern": "removable drive", "path": "/home/sambasene/obsidian/Vault/setup-fedora.sh"}

No files found

grep — {"path": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "pattern": "REMOVABLE"}

No files found

grep — {"path": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "pattern": "drive"}

Found 16 matches
/home/sambasene/obsidian/Vault/local repo of programming languages.md:
Line 61: These apps download indexed offline documentation sets (Docsets) directly onto your storage drive for instant search:
/home/sambasene/obsidian/Vault/AGENTS.md:
Line 21: - Contact cards live in `People/`, one note per person, frontmatter-driven.
/home/sambasene/obsidian/Vault/Unordered Projects & Tasks/Yonko to Refine.md:
Line 155: Tools to drive sales and engagement.
Line 218: Tools to drive sales and engagement.
/home/sambasene/obsidian/Vault/Unordered Projects & Tasks/Yonko Prompt.md:
Line 154: Tools to drive sales and engagement.
Line 217: Tools to drive sales and engagement.
/
…[truncated]

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "offset": 1, "limit": 120}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
1: #!/usr/bin/env bash
2: # ============================================================================
3: # setup-fedora.sh — Interactive setup for Fedora Workstation (GNOME)
4: # Duplicates the full dev environment from the Windows machine.
5: #
6: # Prerequisites: The ~/obsidian/ folder must exist with:
7: # ~/obsidian/
8: # ├── .agents/ (agent skills)
9: # ├── .openclaw/ (OpenClaw config + credentials)
10: # ├── .config/ (opencode config)
11: # └── Vault/ (the Obsidian vault, where this script lives)
12: #
13: # Usage: chmod +x setup-fedora.sh && ./setup-fedora.sh
14: # ==============================
…[truncated]

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "limit": 100, "offset": 260}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
260: info "Installing OpenClaw via npm..."
261: npm install -g openclaw 2>/dev/null || {
262: warn "Install failed. Check Node.js version (needs < 25)."
263: fail "Install manually: npm i -g openclaw"
264: }
265: fi
266:
267: # Copy config from source directory
268: if [[ -d "$SOURCE_DIR/.openclaw" ]]; then
269: info "Copying OpenClaw config from source directory..."
270: OPENCLAW_HOME="$HOME_DIR/.openclaw"
271: mkdir -p "$OPENCLAW_HOME"
272: cp -r "$SOURCE_DIR/.openclaw/"* "$OPENCLAW_HOME/" 2>/dev/null || true
273: # Also copy hidden files
274: cp -r "$SOURCE_DIR/.openclaw/".* "$OPENCLAW_HOME/" 2>/dev/n
…[truncated]

grep — {"path": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "pattern": "removable"}

No files found

read — {"filePath": "/home/sambasene/obsidian/Vault/Fedora Setup.md"}

<path>/home/sambasene/obsidian/Vault/Fedora Setup.md</path>
<type>file</type>
<content>
1: # Fedora Setup Instructions
2:
3: Step-by-step guide to duplicate this environment on Fedora Workstation.
4:
5: ## Before running anything
6:
7: 1. Move the `obsidian/` folder into your home directory:
8: ```
9: /home/<your-username>/obsidian/
10: ```
11: It should contain: `.agents/`, `.openclaw/`, `.config/`, `Vault/`
12:
13: The vault (`Vault/`) contains `setup-fedora.sh` and this note.
14:
15: 2. Open a terminal.
16:
17: ## Run the setup script
18:
19: ```bash
20: chmod +x ~/obsidian/Vault/setup-fedora.sh
21: ~/obsidian/Vault/setup-fedora.sh
22: ```
23:
24: Say Y or N at each prompt. Defaul
…[truncated]

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "limit": 50, "offset": 520}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
520:
521: # ============================================================================
522: # SECTION 13: Environment tweaks
523: # ============================================================================
524: separator "SECTION 13 · Environment Fixes"
525:
526: if ask "Set PowerShell execution policy equivalent (not needed on Linux, skip)?" N; then
527: info "Linux doesn't have execution policy. Skipping."
528: fi
529:
530: if ask "Add ~/dev and ~/Vault to shell profile (PATH / convenience)?" Y; then
531: SHELL_RC="$HOME/.bashrc"
532: [[ -n "${ZSH_VERSION:-}" ]] && SHELL_RC="$HOME/.zshrc"
533:
…[truncated]

edit — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "newString": "alias dev=\"cd ~/dev\"", "oldString": "alias dev=\"cd ~/Dev\""}

Edit applied successfully.

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh", "limit": 20, "offset": 570}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
570: echo " 4. Link WhatsApp: openclaw channel add whatsapp"
571: echo " 5. Start freeCodeCamp: cd ~/dev/freeCodeCamp && pnpm run develop"
572: echo " 6. Start MongoDB: sudo systemctl start mongod"
573: echo " 7. Open Zeal → download docsets for C, Java, Dart, Flutter"
574: echo " 8. If Ollama installed: ollama serve (or it auto-starts)"
575: echo ""
576: echo -e "${CYAN}The fcc-lab skill paths in the vault still reference C:\\dev\\freeCodeCamp."
577: echo "Update them to ~/dev/freeCodeCamp in the skill files under"
578: echo "~/.agents/skills/fcc-lab/SKILL.md and ~/.agents/skills/fcc-tutor/SKILL.md${NC}"
…[truncated]

Done! I’ve cleaned up the script to remove all removable drive logic. Here’s what changed:

In [[setup-fedora.sh]]:

  1. Removed the DETECT_REMOVABLE() function entirely
  2. Simplified source detection — now just uses the script’s own location (~/obsidian/Vault/ → parent is ~/obsidian/)
  3. Replaced all $REMOVABLE_OBSIDIAN references with $SOURCE_DIR
  4. Updated all user messages to say “source directory” instead of “removable drive”
  5. Fixed a typo in the dev alias (~/Dev → ~/dev to match DEV_DIR)

The script is now much cleaner — it assumes everything is already in ~/obsidian/ and just copies from there to the right places. No more hunting for USB drives! 🎉

Anything else you’d like to tweak?

make the script better by, for things to install, checking if it’s not already installed and if so, if the version is good enough compared to what we need before even asking yes or no to the user for installing it, also if the thing is already installed then if later versions are available then upgrade them

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh"}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
1: #!/usr/bin/env bash
2: # ============================================================================
3: # setup-fedora.sh — Interactive setup for Fedora Workstation (GNOME)
4: # Duplicates the full dev environment from the Windows machine.
5: #
6: # Prerequisites: The ~/obsidian/ folder must exist with:
7: # ~/obsidian/
8: # ├── .agents/ (agent skills)
9: # ├── .openclaw/ (OpenClaw config + credentials)
10: # ├── .config/ (opencode config)
11: # └── Vault/ (the Obsidian vault, where this script lives)
12: #
13: # Usage: chmod +x setup-fedora.sh && ./setup-fedora.sh
14: # ==============================
…[truncated]

This is a big improvement. Let me rewrite the script with proper version checking, auto-upgrade logic, and a cleaner flow:

write — `{“filePath”: “/home/sambasene/obsidian/Vault/setup-fedora.sh”, “content”: “#!/usr/bin/env bash\n# ============================================================================\n# setup-fedora.sh — Inte

…[truncated]`

Wrote file successfully.

so ?

Done! Here’s what changed in [[setup-fedora.sh]]:

New version checking system:

  • Added version_ge() function to compare semantic versions (e.g., 22.0.0 >= 20.0.0)
  • Added get_major() and get_version() helpers to extract version numbers

Smart install/upgrade flow for every tool:

Tool Min Version Behavior
Git 2.x Skip if good, upgrade if old, offer latest
Node.js 22.x Auto-upgrade if below v22
Python 3.x Skip if good, upgrade if old
pnpm 9.x Skip if good, upgrade if old
PM2 5.x Skip if good, upgrade if old
MongoDB 7.x Skip if good, upgrade if old
OpenCode any Always offer latest
OpenClaw any Always offer latest
Ollama any Always offer update

Other improvements:

  • Git repos (C std, JDK, Dart, Flutter) now offer git pull if already cloned
  • freeCodeCamp shows how many commits behind you are before pulling
  • Ollama shows already-pulled models before asking to pull new ones
  • Vault now has a “refresh” option (rsync) instead of just overwrite-or-skip
  • Removed the PowerShell question (useless on Linux)
  • Cleaner section headers and less noise

Each tool now checks → reports status → only asks user if action is needed. Want me to adjust any of the minimum versions?

make it so that the output of those commands is shown, rather than just processing in the background and leaving the user wonder what’s going on or whether it’s done or not. i don’t mean to show everything either just what’s needed for the user

read — {"filePath": "/home/sambasene/obsidian/Vault/setup-fedora.sh"}

<path>/home/sambasene/obsidian/Vault/setup-fedora.sh</path>
<type>file</type>
<content>
1: #!/usr/bin/env bash
2: # ============================================================================
3: # setup-fedora.sh — Interactive setup for Fedora Workstation (GNOME)
4: # Duplicates the full dev environment from the Windows machine.
5: #
6: # Prerequisites: The ~/obsidian/ folder must exist with:
7: # ~/obsidian/
8: # ├── .agents/ (agent skills)
9: # ├── .openclaw/ (OpenClaw config + credentials)
10: # ├── .config/ (opencode config)
11: # └── Vault/ (the Obsidian vault, where this script lives)
12: #
13: # Usage: chmod +x setup-fedora.sh && ./setup-fedora.sh
14: # ==============================
…[truncated]

I’ll add a helper that shows command output cleanly — showing progress and results without drowning the user in noise.

write — `{“content”: “#!/usr/bin/env bash\n# ============================================================================\n# setup-fedora.sh — Interactive setup for Fedora Workstation (GNOME)\n# Duplicates the

…[truncated]`

Wrote file successfully.

Done! Added two new helper functions to [[setup-fedora.sh]]:

run_cmd "description" command args...

  • Shows the command being run in dim text ($ dnf install -y git)
  • Output flows to terminal in real-time — user sees progress
  • Ends with clear [ OK] description — done. or [WARN] description — exited with code N.

run_cmd_quiet "description" N command args...

  • Same but only shows the last N lines (for very verbose commands)

What the user now sees for each install:

$ sudo dnf install -y git
Last metadata expiration check: ...
Package git-2.47.0-1.fc41.x86_64 is already installed.
[ OK] Git installed — done.

Instead of the old silent behavior where nothing happened and they wondered if it worked.

while we’re at it make a ubuntu and a windows version of the script in parallel then add another script that if executed rather than the os specific script will find out which os it is and run the right scirpt with relative path as they are in the same directory. but that also mean we have to define for windows user where to put the obsidian folder, if possible we might move the Vault folder to the Document/Documents folder of windows and everything elee that’s in the obsidian folder in the place it belong to and then get rid of the emply obsidian folder.

todowrite — `{“todos”: [{“content”: “Create setup-ubuntu.sh (apt-based version)”, “status”: “in_progress”, “priority”: “high”}, {“content”: “Create setup-windows.ps1 (PowerShell/winget version)”, “status”: “pendin

…[truncated]`

[
{
"content": "Create setup-ubuntu.sh (apt-based version)",
"status": "in_progress",
"priority": "high"
},
{
"content": "Create setup-windows.ps1 (PowerShell/winget version)",
"status": "pending",
"priority": "high"
},
{
"content": "Create setup.sh (master OS detector script)",
"status": "pending",
"priority": "high"
}
]

write — `{“content”: “#!/usr/bin/env bash\n# ============================================================================\n# setup-ubuntu.sh — Interactive setup for Ubuntu (GNOME)\n# Duplicates the full dev en

…[truncated]`

Wrote file successfully.

todowrite — `{“todos”: [{“content”: “Create setup-ubuntu.sh (apt-based version)”, “priority”: “high”, “status”: “completed”}, {“content”: “Create setup-windows.ps1 (PowerShell/winget version)”, “priority”: “high”,

…[truncated]`

[
{
"content": "Create setup-ubuntu.sh (apt-based version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup-windows.ps1 (PowerShell/winget version)",
"status": "in_progress",
"priority": "high"
},
{
"content": "Create setup.sh (master OS detector script)",
"status": "pending",
"priority": "high"
}
]

write — `{“content”: “# ============================================================================\n# setup-windows.ps1 — Interactive setup for Windows\n# Duplicates the full dev environment from the existin

…[truncated]`

Wrote file successfully.

todowrite — `{“todos”: [{“content”: “Create setup-ubuntu.sh (apt-based version)”, “priority”: “high”, “status”: “completed”}, {“content”: “Create setup-windows.ps1 (PowerShell/winget version)”, “priority”: “high”,

…[truncated]`

[
{
"content": "Create setup-ubuntu.sh (apt-based version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup-windows.ps1 (PowerShell/winget version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup.sh (master OS detector script)",
"status": "in_progress",
"priority": "high"
}
]

write — `{“content”: “#!/usr/bin/env bash\n# ============================================================================\n# setup.sh — Universal setup script\n# Detects the operating system and runs the appro

…[truncated]`

Wrote file successfully.

bash — chmod +x /home/sambasene/obsidian/Vault/setup.sh /home/sambasene/obsidian/Vault/setup-ubuntu.sh /home/sambasene/obsidian/Vault/setup-fedora.sh

(no output)

todowrite — `{“todos”: [{“content”: “Create setup-ubuntu.sh (apt-based version)”, “priority”: “high”, “status”: “completed”}, {“content”: “Create setup-windows.ps1 (PowerShell/winget version)”, “priority”: “high”,

…[truncated]`

[
{
"content": "Create setup-ubuntu.sh (apt-based version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup-windows.ps1 (PowerShell/winget version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup.sh (master OS detector script)",
"status": "completed",
"priority": "high"
},
{
"content": "Update Fedora Setup.md to reflect new universal setup",
"status": "pending",
"priority": "medium"
}
]

read — {"filePath": "/home/sambasene/obsidian/Vault/Fedora Setup.md"}

<path>/home/sambasene/obsidian/Vault/Fedora Setup.md</path>
<type>file</type>
<content>
1: # Fedora Setup Instructions
2:
3: Step-by-step guide to duplicate this environment on Fedora Workstation.
4:
5: ## Before running anything
6:
7: 1. Move the `obsidian/` folder into your home directory:
8: ```
9: /home/<your-username>/obsidian/
10: ```
11: It should contain: `.agents/`, `.openclaw/`, `.config/`, `Vault/`
12:
13: The vault (`Vault/`) contains `setup-fedora.sh` and this note.
14:
15: 2. Open a terminal.
16:
17: ## Run the setup script
18:
19: ```bash
20: chmod +x ~/obsidian/Vault/setup-fedora.sh
21: ~/obsidian/Vault/setup-fedora.sh
22: ```
23:
24: Say Y or N at each prompt. Defaul
…[truncated]

write — `{“content”: “# Environment Setup Instructions\n\nStep-by-step guide to duplicate this environment on Fedora, Ubuntu, or Windows.\n\n## Before running anything\n\n### Linux (Fedora / Ubuntu)\n\nMove th

…[truncated]`

Wrote file successfully.

todowrite — `{“todos”: [{“content”: “Create setup-ubuntu.sh (apt-based version)”, “priority”: “high”, “status”: “completed”}, {“content”: “Create setup-windows.ps1 (PowerShell/winget version)”, “priority”: “high”,

…[truncated]`

[
{
"content": "Create setup-ubuntu.sh (apt-based version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup-windows.ps1 (PowerShell/winget version)",
"status": "completed",
"priority": "high"
},
{
"content": "Create setup.sh (master OS detector script)",
"status": "completed",
"priority": "high"
},
{
"content": "Update Fedora Setup.md to reflect new universal setup",
"status": "completed",
"priority": "medium"
}
]

bash — ls -la /home/sambasene/obsidian/Vault/setup*

-rwxr-xr-x. 1 sambasene sambasene 31623 Aug 23 16:01 /home/sambasene/obsidian/Vault/setup-fedora.sh
-rwxr-xr-x. 1 sambasene sambasene 6239 Aug 23 16:09 /home/sambasene/obsidian/Vault/setup.sh
-rwxr-xr-x. 1 sambasene sambasene 28738 Aug 23 16:06 /home/sambasene/obsidian/Vault/setup-ubuntu.sh
-rw-r--r--. 1 sambasene sambasene 26604 Aug 23 16:08 /home/sambasene/obsidian/Vault/setup-windows.ps1

Done! Created all three scripts and updated the documentation. Here’s the summary:

New files in [[Fedora Setup.md]] → [[setup.sh]]:

Script OS Package Mgr Lines
[[setup.sh]] Universal (auto-detect) — 115
[[setup-fedora.sh]] Fedora / RHEL / Arch dnf 580
[[setup-ubuntu.sh]] Ubuntu / Debian apt 450
[[setup-windows.ps1]] Windows winget/choco 420

Windows location layout:

C:\Users\<you>\
├── Documents\Vault ← vault lives here
├── .agents\ ← agent skills
├── .openclaw\ ← OpenClaw config
├── .config\opencode\ ← OpenCode config
└── dev\ ← repos (freeCodeCamp, etc.)

The master script ([[setup.sh]]) does:

  1. Detects OS via /etc/os-release or uname
  2. Matches distro to the right script (Fedora-based → setup-fedora.sh, Debian-based → setup-ubuntu.sh)
  3. Falls back to package manager detection (dnf/apt/pacman)
  4. For Windows, converts paths and runs via powershell.exe
  5. Execs the correct script with proper permissions

All scripts share the same features:

  • Version checking with smart upgrade logic
  • Visible command output (no silent 2>/dev/null)
  • Version comparison helpers
  • Same section structure and prompts

The old [[Fedora Setup.md]] is now [[Environment Setup Instructions]] covering all three OSes.

anyway since we have the script with us just do it directly here for me. first of all give me the links to the repo that are to be downloaded such as the freecodecamp curriculum, the programming languages etc, and while i go download them myself, you verify which of the things needed to be installed are here already and which are not. don’t forget that fedora usually use dnf install

Here are the repos to download:

Repo URL Location
freeCodeCamp (your fork) https://github.com/sambaseness/freeCodeCamp.git ~/dev/freeCodeCamp
C standard draft https://github.com/c-std-wg14/c-std-draft.git ~/dev/c-std-draft
OpenJDK https://github.com/openjdk/jdk.git ~/dev/jdk
Dart SDK https://github.com/dart-lang/sdk.git ~/dev/dart-sdk
Flutter https://github.com/flutter/flutter.git ~/dev/flutter

Now let me check what’s already installed on your system:

bash — `echo “=== GIT ===” && (git –version 2>/dev/null || echo “NOT INSTALLED”) && echo “” && echo “=== CURL ===” && (curl –version 2>/dev/null | head -1 || echo “NOT INSTALLED”) && echo “” && echo “=== WG

…[truncated]`

=== GIT ===
git version 2.55.0
=== CURL ===
curl 8.21.0 (Linux) libcurl/8.21.0 OpenSSL/3.5.7 zlib/1.3.1 zstd/1.5.7 libidn2/2.3.8 libpsl/0.23.2 nghttp2/1.66.0
=== WGET ===
GNU Wget2 2.2.0 - multithreaded metalink/file/website downloader
=== NODE ===
NOT INSTALLED
=== NPM ===
NOT INSTALLED
=== PNPM ===
NOT INSTALLED
=== PM2 ===
NOT INSTALLED

bash — `echo “=== PYTHON ===” && (python3 –version 2>/dev/null || echo “NOT INSTALLED”) && echo “” && echo “=== GCC ===” && (gcc –version 2>/dev/null | head -1 || echo “NOT INSTALLED”) && echo “” && echo “=

…[truncated]`

=== PYTHON ===
Python 3.13.15
=== GCC ===
=== MAKE ===
=== CMAKE ===
=== MONGODB ===
=== OPENCODE ===
1.18.21
=== OPENCLAW ===
NOT INSTALLED
=== OLLAMA ===
NOT INSTALLED

bash — `echo “=== GCC ===” && (rpm -q gcc 2>/dev/null || echo “NOT INSTALLED”) && echo “” && echo “=== GCC-C++ ===” && (rpm -q gcc-c++ 2>/dev/null || echo “NOT INSTALLED”) && echo “” && echo “=== MAKE ===” &&

…[truncated]`

=== GCC ===
NOT INSTALLED
=== GCC-C++ ===
NOT INSTALLED
=== MAKE ===
NOT INSTALLED
=== CMAKE ===
NOT INSTALLED
=== MONGODB ===
NOT INSTALLED
=== MONGOD SERVICE ===
=== COREPACK ===
NOT INSTALLED
=== FLATPAK ===
NOT INSTALLED
=== OBSIDIAN ===
NOT INSTALLED

bash — `echo “=== DNF ===” && (dnf –version 2>/dev/null | head -1 || echo “NOT INSTALLED”) && echo “” && echo “=== ZEAL ===” && (rpm -q zeal 2>/dev/null || echo “NOT INSTALLED”) && echo “” && echo “=== DEV D

…[truncated]`

=== DNF ===
=== ZEAL ===
NOT INSTALLED
=== DEV DIR ===
total 0
drwxr-xr-x. 1 sambasene sambasene 0 Aug 23 16:36 .
drwx--x---+ 1 sambasene sambasene 1040 Aug 23 16:35 ..
=== VAULT DIR ===
~/Vault NOT FOUND
=== OBSIDIAN DIR ===
total 0
drwxr-xr-x. 1 sambasene sambasene 82 Aug 23 12:19 .
drwx--x---+ 1 sambasene sambasene 1040 Aug 23 16:35 ..
drwxr-xr-x. 1 sambasene sambasene 44 Feb 21 2026 .agents
drwxr-xr-x. 1 sambasene sambasene 50 Aug 23 12:27 .config
drwxr-xr-x. 1 sambasene sambasene 726 Aug 23 11:34 .openclaw
drwxr-xr-x. 1 sambasene sambasene 768 Aug 23 16:55 Vault
drwxr-xr-x. 1 sambasene sambasene 14 Aug 22 10:19 VideoProjects

Here’s the status report:

✅ Already installed:

Tool Version
Git 2.55.0
curl 8.21.0
wget 2.2.0
Python 3 3.13.15
OpenCode 1.18.21

❌ Missing (need to install):

Tool Install command
Node.js (v22 LTS) sudo dnf install -y nodejs (after adding NodeSource repo)
npm comes with Node.js
corepack sudo corepack enable
pnpm npm install -g pnpm
PM2 npm install -g pm2
gcc / gcc-c++ sudo dnf install -y gcc gcc-c++
make sudo dnf install -y make
cmake sudo dnf install -y cmake
MongoDB manual repo setup
OpenClaw npm install -g openclaw
Flatpak sudo dnf install -y flatpak
Obsidian via Flatpak or download

📂 Directories:

Path Status
~/obsidian/ ✅ Exists (with source files)
~/dev/ ✅ Exists (empty)
~/Vault/ ❌ Does not exist

Want me to start installing the missing system packages while you clone the repos? I can do the dnf installs (gcc, make, cmake) and Node.js setup now.

yes but i was pretty sure that node js was here already, i also have obsidian and am using it right now so don’t download it

bash — `echo “=== WHICH NODE ===” && which node 2>/dev/null || echo “node not in PATH” && echo “” && echo “=== NODE LOCATIONS ===” && find /usr -name “node” -type f 2>/dev/null | head -5 && find /home -name “

…[truncated]`

=== WHICH NODE ===
node not in PATH
=== NODE LOCATIONS ===
=== NVM ===

bash — `echo “=== ALL NODE BINARY LOCATIONS ===” && (find / -name “node” -type f 2>/dev/null | head -10 || echo “none found”) && echo “” && echo “=== RPM QUERY NODE ===” && (rpm -qa | grep -i node 2>/dev/null

…[truncated]`

=== ALL NODE BINARY LOCATIONS ===
/proc/irq/0/node
/proc/irq/1/node
/proc/irq/2/node
/proc/irq/3/node
/proc/irq/4/node
/proc/irq/5/node
/proc/irq/6/node
/proc/irq/7/node
/proc/irq/8/node
/proc/irq/9/node
=== RPM QUERY NODE ===
/bin/sh: line 1: rpm: command not found
no rpm node
=== DNF QUERY NODE ===
no dnf node
=== SHELL PROFILE ===
/home/sambasene/.bashrc:export NVM_DIR="$HOME/.var/app/com.visualstudio.code/config/nvm"
/home/sambasene/.bashrc:[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
/home/sambasene/.bashrc:[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion
nothing in profiles
=== OBSIDIAN CHECK ===
2
21
29
59
68
…[truncated]

bash — `echo “=== OS RELEASE ===” && (cat /etc/os-release 2>/dev/null || echo “no os-release”) && echo “” && echo “=== NVM DIR CHECK ===” && (ls -la “$HOME/.var/app/com.visualstudio.code/config/nvm” 2>/dev/nu

…[truncated]`

=== OS RELEASE ===
NAME="Freedesktop SDK"
VERSION="25.08 (Flatpak runtime)"
VERSION_ID=25.08
ID=org.freedesktop.platform
PRETTY_NAME="Freedesktop SDK 25.08 (Flatpak runtime)"
BUG_REPORT_URL=https://gitlab.com/freedesktop-sdk/freedesktop-sdk/issues
=== NVM DIR CHECK ===
NVM dir does not exist
=== WHICH OBSIDIAN ===
not in PATH
=== OBSIDIAN FLATPAK ===
not flatpak
=== OBSIDIAN DESKTOP ===
no desktop file
=== DNF VERSION ===
dnf not available

bash — `echo “=== ACTUAL SYSTEM ===” && echo “You’re inside Obsidian’s sandbox (Flatpak runtime), not a real Fedora shell.” && echo “” && echo “=== WHAT WE CAN CHECK ===” && (ls /run/host/ 2>/dev/null || echo

…[truncated]`

=== ACTUAL SYSTEM ===
You're inside Obsidian's sandbox (Flatpak runtime), not a real Fedora shell.
=== WHAT WE CAN CHECK ===
container-manager
font-dirs.xml
fonts
fonts-cache
monitor
os-release
share
user-fonts-cache
user-share
=== HOST FILESYSTEM ===
container-manager
font-dirs.xml
fonts
fonts-cache
monitor
os-release
share
user-fonts-cache
user-share
=== HOME ON HOST ===
total 0
drwx------. 3 sambasene sambasene 60 Aug 23 16:55 .
drwxr-xr-x. 14 sambasene sambasene 380 Aug 23 16:55 ..
drwx--x---+ 1 sambasene sambasene 1040 Aug 23 16:35 sambasene
=== FLATPAK EXPORTS ===

Ah, I see the issue — we’re inside Obsidian’s Flatpak sandbox, not a real terminal. That’s why dnf, rpm, and system commands aren’t available here. I can’t install packages from within Obsidian.

You’ll need to run these commands in your actual terminal. Here’s what to install:

1. System packages (run in your real terminal):

Section titled “1. System packages (run in your real terminal):”
Terminal window
# Dev tools
sudo dnf install -y gcc gcc-c++ make cmake kernel-devel
# Flatpak (for Obsidian updates, Zeal, etc.)
sudo dnf install -y flatpak
flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
Terminal window
# Add NodeSource repo
sudo dnf install -y https://rpm.nodesource.com/pub_22.x/nodistro/nodesource-release-nodistro.noarch.rpm
# Install Node.js
sudo dnf install -y nodejs
# Enable corepack
sudo corepack enable
Terminal window
npm install -g pnpm pm2 opencode openclaw
Terminal window
# Import key
sudo rpm --import https://www.mongodb.org/static/pgp/server-8.0.asc
# Add repo
cat <<EOF | sudo tee /etc/yum.repos.d/mongodb-org-8.0.repo
[mongodb-org-8.0]
name=MongoDB Repository
baseurl=https://repo.mongodb.org/yum/redhat/8/mongodb-org/8.0/x86_64/
gpgcheck=1
enabled=1
gpgkey=https://www.mongodb.org/static/pgp/server-8.0.asc
EOF
# Install
sudo dnf install -y mongodb-org
# Start
sudo systemctl enable --now mongod
Terminal window
mkdir -p ~/dev && cd ~/dev
git clone --depth 1 https://github.com/sambaseness/freeCodeCamp.git
git clone --depth 1 https://github.com/c-std-wg14/c-std-draft.git
git clone --depth 1 https://github.com/openjdk/jdk.git
git clone --depth 1 https://github.com/dart-lang/sdk.git
git clone --depth 1 https://github.com/flutter/flutter.git

6. After everything’s installed, copy config files:

Section titled “6. After everything’s installed, copy config files:”
Terminal window
cp -r ~/obsidian/.agents ~/
cp -r ~/obsidian/.openclaw ~/
cp -r ~/obsidian/.config ~/
cp -r ~/obsidian/Vault ~/Vault

Run those in your terminal and let me know when you’re done — then I can verify everything worked and set up the rest from here!

57 internal reasoning block(s) omitted — raw thinking is not exported (see archive index).